DC DRIVER for LEDRA™ FIXTURES

Description:
The 20 watt driver is a Class II power supply rated for operating LEDs. It features an universal voltage input and a constant current output. The encapsulated electronics and inherent protection adds reliability to both the driver and LEDs connected. To avoid damaged to LEDs, the number of fixtures connected must be within the range limits listed for the driver and be wired in series. Use 18-20 gauge wire for remote installation up to a maximum of 150ft. National and local codes must be followed when mounting driver inside a junction box. Please contact manufacturer for further details.

Technical Specs:
100-240V AC, 50/60Hz input
700mA DC constant current output
6VA, 5W for 2(3 watt LEDs
8VA, 7W for 3(3 watt LEDs)
10VA, 10W for 4(3 watt LEDs)
13VA, 12W for 5(3 watt LEDs)

Amber/Red leds are 2 watt, requiring a minimum of 3, up to a maximum of 8.

Operating temperature: -22°F to 140°F
Class II rated
Suitable for damp location
Short circuit protection
Overload protection
Over-voltage protection
Thermal protection

70417

20W, for 2-5(3watt LED)